Yabo
Leandro Charm
Couldn't load pickup availability
This charm is made out of recycled 925 sterling silver. It is hand melted and brought into shape, which makes the piece a unique one each time it’s made.
The charm comes with a 50cm snake chain.
Note that every piece is made to order, may vary in its appearance and can take 2-6 weeks to produce before being shipped.
![Leandro Charm](http://www.yabostudio.com/cdn/shop/files/image_1445x.jpg?v=1682597227)
![Leandro Charm](http://www.yabostudio.com/cdn/shop/files/image_4c7e737e-79a4-4c55-a8b2-6a8eae32106e_1445x.jpg?v=1682597246)
![Leandro Charm](http://www.yabostudio.com/cdn/shop/files/image_767f7305-a5f3-4313-bde9-3d187faaedbc_1445x.jpg?v=1682597266)
![Leandro Charm](http://www.yabostudio.com/cdn/shop/files/image_9edc1c10-ff8e-420e-aebb-b9e2f0a88a9c_1445x.jpg?v=1682597416)
![Leandro Charm](http://www.yabostudio.com/cdn/shop/files/image_1faeaaa3-d8ea-4c75-b288-df62a89d8416_1445x.jpg?v=1682597419)
Size Guide
Rings
To messure your ring size, you can either go to a jewelry store and ask them to take the measurements, or you can try it yourself as explained below. My rings come in 4 different sizes. Please don’t hesitate contacting me via Mail or Instagram if you are unsure or would like a different size or color.
SIZE |
Ringsizes |
INNER Ø in mm |
---|---|---|
S |
52 |
16,6 |
M |
54 |
17,2 |
L |
56 |
17,8 |
XL |
58 |
18,5 |
MEASURE CURRENT RING
- 1. Select a ring that properly fits the intended finger.
- 2. Place the ring over a ruler.
- This measurement refers to the inside diameter of the ring.
- If the ring falls between two sizes, order the larger size.
MEASURE BY STRING OR PAPER
- 1. Cut a piece of string or paper so it's long enough to wrap around your finger.
- 2. Wrap is snugly at the base of the knuckle
- 3. Using a pen or pencil, mark where the ends overlap
- 4. Lay it flat and use a ruler to measure the length in millimeter
- If the ring falls between two sizes, order the larger size.
Bangles
SIZE INNER Ø in mm
S 58
M 63
L 68
Step 1: Make a fist.
Step 2: Measure the length from the outside of the first knuckle to the point between the third and fourth knuckle.
Step 3: This measurement equals the required diameter. Choose the closest size. It will fit just right.